Carbon Fiber Resources

Thinking about using carbon fiber for your next project, but not sure where to start? Read on for answers to common questions and guides on how to select the right thicknesses, finishes, and more for your needs.

Tell Us About Your Project
Stock Products

What is carbon fiber?

Carbon fiber is one of the strongest and most lightweight materials available on the market today.

Continue Reading

How do I work with carbon fiber?

Looking for practical information about how to work with carbon fiber? We’ve got you covered.

Continue Reading

Can carbon fiber be molded?

Thinking about molded parts? Read on. Understanding the basics beforehand will make the job a lot easier.

Continue Reading

What thickness is right for my project?

How thick a piece should you buy? It’s usually not as thick as you think. Here are some guidelines to help you decide.

Continue Reading

Which finish should I choose?

Choosing a finish can be confusing. Here are some inside tips to help you narrow down what’s best for your application.

Continue Reading

 

How do I cut carbon fiber?

Thin carbon fiber sheets (up to .5mm) can be cut with scissors or a sharp razor knife.

Continue Reading

What adhesive should I use?

Our favorite adhesive is a high performance, high temperature film made by 3M because it’s quick, clean, easy to use and it holds a strong, tight bond.

Continue Reading

Can carbon fiber withstand high temperatures?

It’s  all about the resin. Our high temperature carbon fiber panels are made with a specially formulated high temperature, high strength epoxy resin.

Continue Reading

More questions? We’re here to help.

Here are answers to some of the questions we’re asked most:

Our gloss finish is beautiful but scratches easily. It’s best for an application that will have limited handling. Or you can protect the finish by applying a clearcoat. The satin finish will stand up to significant usage without showing scratches.

The semi-gloss finish is our standard finish for thick pieces that require a durable, smooth finish. The matte finish is reserved for industrial applications that require a textured finish. It is not recommended for cosmetic applications.

We recommend applying several coats of automotive clear coat to protect your gloss finish from scratching. It’s available at any auto parts store.
If your project requires a very bendable piece, you’ll need our thinnest veneer (.25mm). If your surface is flat, either .25mm or .5mm will do the job. It’s just a matter of budget and personal taste.
Our thin veneers (.25mm and .5mm) can be cut with sharp scissors. All other thicknesses can be cut with a dremel tool.
No. The resin in the carbon fiber has already been hardened and cured. Heating will only destabilize the resin, damaging the surface and making it gummy. With that, it can’t be restored and you’ll have an unusable sheet.
Purchasing fabric only makes sense if you intend to wrap a shaped piece in carbon fiber and infuse it with resin yourself. It’s a significant project that takes some time and know-how. The vast majority of customers purchase laminated sheets because all the work is done.
In general, no. A few companies are developing ways to dye carbon fiber in muted colors, but it’s uncommon. Industry-wide, most colored material is made from fiberglass or kevlar.
Carbon fiber comes in different fabric weights — 3k and 6k are most common and look very similar. Sometimes companies make carbon fiber panels in a 12k weight for cost savings. It has a larger, thicker weave than 3k or 6k.
It depends entirely on the temperature ratings of the resin used. Our standard resin will withstand temperatures of 180 degrees+. Our high temp resin reaches 400 degrees. Even higher temp resins are available through specialty sources.

Carbon Fiber 101

New to carbon fiber? We’ve got you covered.

This comprehensive guide will get you up to speed on everything you need to know.

Download PDF